{"title":"Products","description":null,"products":[{"product_id":"1w-2-4ghz-bluetooth-jammer","title":"1W 2.4Ghz Bluetooth Jammer","description":"\u003cp\u003eIt interrupts: audio in speakers, smartphone connections, WiFi, RC Drones (etc.), IoT devices, and much more communicating on 2.4GHz!\u003c\/p\u003e\n\u003cp\u003eIts as simple as just plugging in the Type-C and it starts working\u003c\/p\u003e\n\u003cp\u003eOutput Power: 2.4G 30dBm (narrowband), 26dBm (broadband)\u003c\/p\u003e\n\u003cp\u003eThe 2.4Ghz signal generator operates reliably within a 1-3 meter range but has been tested to work at over 10 meters depending on the environment\u003c\/p\u003e\n\u003cp\u003ePlease note that this device generates a lot of heat from the amplifier and it is recommended to keep the heatsink on when in operation and a fan if on for a prolonged period or in an enclosed environment.\u003c\/p\u003e\n\u003cp\u003eBluetooth (BT) 80CH - jams classic Bluetooth, Frequency Range: 2.402 GHz to 2.480 GHz\u003c\/p\u003e\n\u003cp\u003eBluetoothLowEnergy (BLE) 40CH - jams Bluetooth Low Energy, Frequency Range: 2.400 GHz to 2.4835 GHz\u003c\/p\u003e\n\u003cp\u003eBT-BLE 40-80CH - jams classic Bluetooth \u0026amp; Bluetooth Low Energy, Frequency Range: 2.402 GHz to 2.480 GHz \u0026amp; 2.400 GHz to 2.4835 GHz\u003c\/p\u003e\n\u003cp\u003eBT-WiFi 14-80CH - jams classic Bluetooth \u0026amp; WiFi, Frequency Range: 2.402 GHz to 2.480 GHz \u0026amp; 2.400 GHz to 2.4835 GHz\u003c\/p\u003e\n\u003cp\u003eWiFi 14CH - jams WiFi, Frequency Range: 2.400 GHz to 2.4835 GHz\u003c\/p\u003e\n\u003cp\u003e2.4GHz All 1-125 CH - jams RC (Drones etc.), Frequency Range: 2.400 GHz to 2.525 GHz\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eDISCLAIMER:\u003c\/span\u003e\u003c\/strong\u003e Please use this tool responsibly and do not use it against others without their permission! Please check the legal regulations in your country before using it. I don't take any responsibility for what you do with this product.\u003c\/p\u003e","brand":"PCB Studios","offers":[{"title":"Default Title","offer_id":42818023587915,"sku":"9264775","price":149.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0677\/4004\/1291\/files\/IMG_1336.jpg?v=1783473576"},{"product_id":"2-4-5-ghz-deauther","title":"2.4\/5 GHz Deauther","description":"\u003cp\u003eFor many years a common hardware tool for learning about attacking and testing WiFi networks has been the Deauther. The original Deauther was built around the ESP8266 and could create and execute a variety of attacks on 2.4 GHz WiFi networks. The original is an amazing device and has been built into all kinds of form factors including my Flipper Zero ESP8266 Deauther. Of course time and technology has moved onward and now it’s very common to see or own 5 GHz WiFi systems. This new Realtek RTL8720DN-based Deauther tool can now explore and attack both 2.4 GHz and 5 GHz networks simultaneously.\u003c\/p\u003e\n\u003cp\u003eThe deauther hosts a WiFi network with the name of RTL8720dn-Deauther and a password of 0123456789. Connect to this network and type the IP of your deauther (typically \u003cstrong\u003e192.168.1.1\u003c\/strong\u003e) into a web browser of a choice.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRescan networks\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRescan and detect all WiFi networks in your area. After a successful scan, the networks are listed in the above table.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLaunch Deauth-Attack\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDeauthenticates all clients connected to one or multiple networks. Select the networks you want to deauth in the table above and click \u003cstrong\u003eStart Attack!\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStopping a Deauth-Attack\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTo stop an ongoing attack, hit the \u003cstrong\u003eStop\u003c\/strong\u003e button.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLeds\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe deauther utilizes the RGB led that most devboards have. This is what the different colors indicate:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRed: The system state. Lights up when the system is usable.\u003c\/li\u003e\n\u003cli\u003eGreen: Lights up when a HTTP communication between a device and the Deauther is happening.\u003c\/li\u003e\n\u003cli\u003eBlue: Flashes when a deauth frame is being sent.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PCB Studios","offers":[{"title":"Yes","offer_id":42818023522379,"sku":"1231934","price":54.99,"currency_code":"USD","in_stock":true},{"title":"No","offer_id":42818023555147,"sku":"6403419","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0677\/4004\/1291\/files\/IMG_1418_b32e3c92-2ae6-435f-91ee-3a3fdfc95be0.jpg?v=1783473546"},{"product_id":"5000mah-21700-battery-cells","title":"5000mAh 21700 Battery Cells","description":"\u003cp\u003eThese are genuine BAK N21700CG-50 battery cells. They are not pulls, rewraps, or recycled cells. BAK is an established manufacturer that supplies cells for major e-bike and energy storage brands. These are perfect for battery pack builds, solar installs, e-bikes, and DIY power projects.\u003c\/p\u003e\n\u003cp\u003eThe backstory for these particular cells is they were purchased by an EV battery company that hoped to build hot-swappable battery packs for EVs to minimize charging times. As fast charging has gotten faster and faster, I don't think that panned out that well.\u003c\/p\u003e\n\u003cp\u003eEach cell will arrive\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003epre-charged to ~3.6V\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003e📦 Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eBAK N21700CG-50\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e21700 (≈21×70 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNominal Voltage:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e3.60V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCharge Voltage:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e4.20V max\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDischarge Cutoff:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e2.5V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eRated 5000 mAh\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Charge Current:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e5A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Continuous Discharging Current:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e10A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChemistry:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eNCA Li-ion\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTop Type:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eFlat Top\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003e🔋Applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCustom battery packs (e-bikes, scooters, power tools)\u003c\/li\u003e\n\u003cli\u003eEnergy storage \/ solar backup systems\u003c\/li\u003e\n\u003cli\u003eHigh-capacity portable power \/ DIY UPS\u003c\/li\u003e\n\u003cli\u003eHobbyist electronics needing reliable, large-capacity cells\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cp\u003e\u0026gt; ⚠️\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eDisclaimer:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eLithium ion batteries may explode or burn due to improper use. Using these batteries for purposes not intended by the manufacturer, including outside a battery pack and\/or without a BMS, may cause severe injury and damage. I am not responsible for any injuries caused by lithium ion batteries - use at your own risk.\u003c\/p\u003e","brand":"PCB Studios","offers":[{"title":"Default Title","offer_id":42818023653451,"sku":"Z881999","price":2.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0677\/4004\/1291\/files\/IMG_02301x1_027a28c4-651b-4506-b520-23d826f67aab.jpg?v=1783473485"},{"product_id":"flipper-zero-cc1101-gpio-adapter","title":"Flipper Zero CC1101 GPIO Adapter","description":"\u003cp\u003eCC1101 Module Optional\u003c\/p\u003e\n\u003cp\u003eCC1101 module does NOT come with an antenna if you want one please select the antenna option\u003c\/p\u003e\n\u003cp\u003eThis is a GPIO board for the flipper zero that takes 5v to power the CC1101 Module\u003c\/p\u003e\n\u003cp\u003eI made this board to allow for the attachment of an external CC1101 module on your Flipper Zero.\u003c\/p\u003e\n\u003cp\u003eThis board just slots right into GPIO pins 1-8 on your flipper zero\u003c\/p\u003e\n\u003cp\u003eThe board is small enough to easily carry around in your pocket or small case\u003c\/p\u003e","brand":"PCB Studios","offers":[{"title":"Yes and Soldered \/ Yes \/ Yes","offer_id":42968332697675,"sku":null,"price":29.99,"currency_code":"USD","in_stock":true},{"title":"Yes and Soldered \/ Yes \/ No","offer_id":42968332730443,"sku":null,"price":29.99,"currency_code":"USD","in_stock":true},{"title":"Yes and Soldered \/ No \/ Yes","offer_id":42968332763211,"sku":null,"price":29.99,"currency_code":"USD","in_stock":true},{"title":"Yes and Soldered \/ No \/ No","offer_id":42968332795979,"sku":null,"price":29.99,"currency_code":"USD","in_stock":true},{"title":"Yes But Not Soldered \/ Yes \/ Yes","offer_id":42968332828747,"sku":null,"price":29.99,"currency_code":"USD","in_stock":true},{"title":"Yes But Not Soldered \/ Yes \/ No","offer_id":42968332861515,"sku":null,"price":29.99,"currency_code":"USD","in_stock":true},{"title":"Yes But Not Soldered \/ No \/ Yes","offer_id":42968332894283,"sku":null,"price":29.99,"currency_code":"USD","in_stock":true},{"title":"Yes But Not Soldered \/ No \/ No","offer_id":42968332927051,"sku":null,"price":29.99,"currency_code":"USD","in_stock":true},{"title":"No \/ Yes \/ Yes","offer_id":42968332959819,"sku":null,"price":25.99,"currency_code":"USD","in_stock":true},{"title":"No \/ Yes \/ No","offer_id":42968332992587,"sku":null,"price":25.99,"currency_code":"USD","in_stock":true},{"title":"No \/ No \/ Yes","offer_id":42968333025355,"sku":null,"price":24.99,"currency_code":"USD","in_stock":true},{"title":"No \/ No \/ No","offer_id":42968333058123,"sku":null,"price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0677\/4004\/1291\/files\/IMG_7483.jpg?v=1783556489"},{"product_id":"flipper-zero-esp8266-deauther","title":"Flipper Zero ESP8266 Deauther","description":"\u003cp\u003eThis is a GPIO board for the flipper zero that allows you to add an ESP8266 board programmed with the correct code so that you can deauth networks\u003c\/p\u003e\n\u003cp\u003eYou can either purchase a board with it or you can use your own\u003c\/p\u003e\n\u003cp\u003eThe board is running a modified version of SpacehuhnTechs ESP8266 Deauther from SequoiaSan\u003c\/p\u003e\n\u003cp\u003eThis software allows you to easily perform a variety of actions to test 802.11 wireless networks by using an inexpensive ESP8266 WiFi SoC (System On A Chip).\u003c\/p\u003e\n\u003cp\u003eThe main feature, the deauthentication attack, is used to disconnect devices from their WiFi network.\u003c\/p\u003e\n\u003cp\u003eBefore you can use this module you need to add the app to your flipper zero. The app is already installed on most custom firmwares such as Rougemaster and Xtreme. To get to the app go to Apps\u0026gt;GPIO\u0026gt;[ESP8266] Deauther. If you do not have the app already installed you can go to my \u003ca href=\"https:\/\/github.com\/suitablebat9\/Flipper-Zero-ESP8266-Deauther\" rel=\"noopener noreferrer nofollow\" target=\"_blank\"\u003eGitHub\u003c\/a\u003e for instruction on how to install and use it.\u003c\/p\u003e\n\u003cp\u003eYou can find instructions on how to use the board on my \u003ca href=\"https:\/\/github.com\/suitablebat9\/Flipper-Zero-ESP8266-Deauther\" rel=\"noopener noreferrer nofollow\" target=\"_blank\"\u003eGitHub\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eNote: This only works on 2.4ghz networks NOT 5ghz\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003eDISCLAIMER\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePlease use this tool responsibly and do not use it against others without their permission!\u003c\/p\u003e\n\u003cp\u003ePlease check the legal regulations in your country before using it.\u003c\/p\u003e\n\u003cp\u003eI don't take any responsibility for what you do with this board\/code.\u003c\/p\u003e","brand":"PCB Studios","offers":[{"title":"Solder ESP8266","offer_id":42818023686219,"sku":"9062398","price":29.99,"currency_code":"USD","in_stock":true},{"title":"Use your own ESP8266","offer_id":42818023718987,"sku":"6000643","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0677\/4004\/1291\/files\/IMG_78421x1_17abce97-23ae-4ae3-b062-a5fdfcff3762.jpg?v=1783473378"},{"product_id":"type-c-usb-pd-65w-fast-charging-module-dc8-32v","title":"Type-C USB PD 65W Fast Charging Module DC8-32V","description":"\u003cp\u003eType-C USB PD 65W Fast Charging Module DC8-32V\u003c\/p\u003e\n\u003cp\u003eInput voltage: DC8~ 30V\u003c\/p\u003e\n\u003cp\u003eOutput voltage: Automatically adjust between 3.3V and 21V when connected to a compatible TYPE-C receiving device (input voltage should be higher than output voltage, if triggering a 20V fast charging, input voltage should be higher than 20V)\u003c\/p\u003e\n\u003cp\u003eOutput power: maximum 65W(5V3A,9V3A,12V3A,20V3.25A.etc.)\u003c\/p\u003e\n\u003cp\u003eOutput voltage ripple:\u0026lt;200mV\u003c\/p\u003e\n\u003cp\u003eNo-load current: \u0026lt;3mA\u003c\/p\u003e\n\u003cp\u003eInput overvoltage and undervoltage protection\u003c\/p\u003e\n\u003cp\u003eInput overcurrent protection\u003c\/p\u003e\n\u003cp\u003eOutput overcurrent and short circuit protection overall\u003c\/p\u003e\n\u003cp\u003eOver temperature protection\u003c\/p\u003e","brand":"PCB Studios","offers":[{"title":"Heatsink Pre-applied","offer_id":42818024341579,"sku":"7502742","price":6.99,"currency_code":"USD","in_stock":true},{"title":"Heatsink In Separate Bag","offer_id":42818024374347,"sku":"590784F","price":6.99,"currency_code":"USD","in_stock":true},{"title":"No Heatsink","offer_id":42818024407115,"sku":"X553431","price":5.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0677\/4004\/1291\/files\/IMG_77091x1_17b0af9c-f889-4f88-a0b8-5375c87fb104.jpg?v=1783473318"},{"product_id":"o4-lite-lens-coaxial-connector-for-dji-o4-o4-pro-air-unit","title":"O4 Lite Lens-Coaxial Connector for DJI O4\/O4 Pro Air Unit","description":"\u003cp\u003e\u003cstrong\u003eCompatible with DJI O4\/O4 Pro Air Unit\u003c\/strong\u003e Designed specifically for the DJI O4\/O4 Pro Air Unit, this O4 Lite Lens-Coaxial Connector ensures seamless integration and reliable performance in your FPV drone setup.\u003c\/p\u003e\n\u003cp\u003eThis small but crucial replacement adapter solves the problem of the original DJI O4 Air Unit's fragile lens-to-coaxial cable interface! It's designed specifically for the lens-to-coaxial cable interface and replaces the fragile original circuit board.\u003c\/p\u003e","brand":"PCB Studios","offers":[{"title":"Default Title","offer_id":42896783769675,"sku":null,"price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0677\/4004\/1291\/files\/388FFB28-7426-4B59-877D-69578AE5C34A.jpg?v=1784664877"},{"product_id":"usb-power-blocker","title":"USB Power Blocker - Stops Charging, Allows Data","description":"\u003cp\u003eThis is \u003cstrong\u003eNOT\u003c\/strong\u003e a data blocker\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eThis is a USB-A male to female adaptor which has the D+, D- and 0V (GND) connected but the 5V disconnected, so power cannot pass through.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eUseful for specialist applications such as 3D Printers and Raspberry Pi where providing power results in undesirable effects\u003c\/p\u003e\n\u003cp\u003eI've been using this to prevent my 3d printer from back feeding power to my devices. Originally was using it to protect my raspberry pi, and now it's protecting my Sonic Pad.\u003c\/p\u003e\n\u003cp\u003eIf you're running Klipper on your 3D printer and have weird stability issues (including undervoltage warnings or wifi consistency) or maybe the LCD screen is staying on when you've turned off the main power, it's being caused from the USB on the Raspberry Pi board sending 5V power to the printer control board. If you won't want to deal with hacking up a USB cord to cut the red power wire or trust that sticking electrical tape over the pin in the plug will work, then this is a quick and easy solution.\u003c\/p\u003e\n\u003cp\u003eSupports USB 2.0 Data Transfer.\u003c\/p\u003e","brand":"PCB Studios","offers":[{"title":"Yes","offer_id":42942433886283,"sku":null,"price":6.99,"currency_code":"USD","in_stock":true},{"title":"No","offer_id":42942433919051,"sku":null,"price":5.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0677\/4004\/1291\/files\/IMG_2579.jpg?v=1784919997"},{"product_id":"xt60-lock-retention-clip","title":"XT60 Lock Retention Clip","description":"\u003cp\u003eI have a Vapor D5 FPV drone with an XT60H connector, but all of my batteries use standard XT60 connectors. During crashes, the battery would often disconnect, making the drone harder to find and recover, so I designed these retention clips.\u003c\/p\u003e\n\u003cp\u003eChoose the clip that fits your setup, connect the battery, and slide the clip into place. The versions compatible with both XT60 and XT60H connectors also include optional arrow variants to indicate current flow direction from the battery, making installation quicker at a glance.\u003c\/p\u003e\n\u003cp\u003eYou can find out if yours is XT60 or XT60H by either seeing if it says on the connector or if it has a plastic boot that goes over the solder points. You can also reference the last image to get a better idea of which is which.\u003c\/p\u003e\n\u003cp\u003eAll of the clips are printed out of Bambu Lab TPU for AMS making them flexible to get on easily but not too flexible to where they fall off during a crash.\u003c\/p\u003e","brand":"PCB Studios","offers":[{"title":"XT60","offer_id":42942636228683,"sku":null,"price":9.99,"currency_code":"USD","in_stock":true},{"title":"XT60H","offer_id":42942636261451,"sku":null,"price":9.99,"currency_code":"USD","in_stock":true},{"title":"XT60→T60H","offer_id":42942636294219,"sku":null,"price":9.99,"currency_code":"USD","in_stock":true},{"title":"XT60H→XT60 w Arrow","offer_id":42942636326987,"sku":null,"price":9.99,"currency_code":"USD","in_stock":true},{"title":"XT60→XT60H w Arrow","offer_id":42942636359755,"sku":null,"price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0677\/4004\/1291\/files\/IMG_2160.jpg?v=1784929259"},{"product_id":"a123-systems-anr26650-m1b-26650-2500mah","title":"A123 Systems ANR26650 M1B 26650 2500mAh","description":"\u003cp\u003eA123 Systems ANR26650 M1B 26650 2500mAh 50A Continuous\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eThese cells are used but in good condition, featuring the newer A123 26650 M1B power cells. These are true high-power LiFePO4 cells each capable of delivering up to 120A for 10 seconds.\u003c\/span\u003e\u003c\/p\u003e","brand":"PCB Studios","offers":[{"title":"Default Title","offer_id":43027177439307,"sku":null,"price":7.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0677\/4004\/1291\/files\/IMG-2743.jpg?v=1786585850"},{"product_id":"dji-o4-o4-pro-u-fl-connector-repair","title":"DJI O4\/O4 Pro U.FL Connector Repair","description":"\u003cp class=\"p1\"\u003eThe DJI O4 U.FL antenna connectors are known for being fragile, especially on the O4 Lite. Even a minor crash can cause the connector to break or rip away from the board.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eDuring checkout, you can select \u003cspan class=\"s1\"\u003e\u003cb\u003eResin Reinforcement\u003c\/b\u003e\u003c\/span\u003e. This service uses UV resin to reinforce and secure the antenna connector and surrounding area, helping prevent the connector from being ripped off during future crashes.\u003c\/p\u003e\n\u003ch3\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eAntenna Orientation\u003c\/b\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"p2\"\u003eIf you want the antenna positioned in a \u003cspan class=\"s1\"\u003e\u003cb\u003especific orientation\u003c\/b\u003e\u003c\/span\u003e before the resin reinforcement is applied, please specify your preferred orientation in the \u003cspan class=\"s1\"\u003e\u003cb\u003etext box provided in the product options during checkout\u003c\/b\u003e\u003c\/span\u003e.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eOnce the resin reinforcement has been applied, the antenna may be difficult or impossible to reposition without removing the reinforcement.\u003c\/p\u003e\n\u003ch3\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eWhat to Send\u003c\/b\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"p3\"\u003eWhen sending your unit in, please include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe main O4 unit\u003c\/li\u003e\n\u003cli\u003eThe antenna\u003c\/li\u003e\n\u003cli\u003eThe original U.FL connector, if possible\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"p3\"\u003eIf you select \u003cspan class=\"s1\"\u003e\u003cb\u003eResin Reinforcement for the camera\u003c\/b\u003e\u003c\/span\u003e, please also include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe camera\u003c\/li\u003e\n\u003cli\u003eThe camera cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eConformal Coating\u003c\/b\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"p1\"\u003e\u003cb\u003eConformal Coating\u003c\/b\u003e is an additional service that applies a silicone conformal coating to the O4 unit’s components to provide additional protection against moisture and water damage.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eIf you send in the camera, the camera’s components will also be conformally coated when this option is selected.\u003c\/p\u003e\n\u003ch3\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eImportant Information\u003c\/b\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"p1\"\u003ePlease be aware that \u003cspan class=\"s1\"\u003e\u003cb\u003eresin reinforcement is intended to be a permanent modification\u003c\/b\u003e\u003c\/span\u003e. Once the antenna or camera connector has been reinforced with resin, it may be difficult or impossible to remove the reinforcement without damaging the surrounding components.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eAfter receiving your unit back, you may need to \u003cspan class=\"s1\"\u003e\u003cb\u003ere-pair the O4 unit with your goggles\u003c\/b\u003e\u003c\/span\u003e. Units are paired with my goggles during testing to verify proper operation before being shipped back.\u003c\/p\u003e\n\u003ch3\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eService \u0026amp; Shipping Timeline\u003c\/b\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"p1\"\u003eOnce your payment has been processed, you will receive a shipping label via email \u003cspan class=\"s1\"\u003e\u003cb\u003ewithin 3 business days\u003c\/b\u003e\u003c\/span\u003e.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eAfter your unit is received, the repair will be completed \u003cspan class=\"s1\"\u003e\u003cb\u003ewithin 5 business days\u003c\/b\u003e\u003c\/span\u003e, after which it will be shipped back to you.\u003c\/p\u003e","brand":"PCB Studios","offers":[{"title":"Default Title","offer_id":43040535871563,"sku":null,"price":100.0,"currency_code":"USD","in_stock":true}]}],"url":"https:\/\/www.pcb-studios.com\/collections\/all.oembed","provider":"PCB Studios","version":"1.0","type":"link"}